Fuel Cell

Hydrogenics Corp (HYGS) warned that first-quarter revenue would be below expectations because of production delays in its OnSite Generation unit. Hydrogenics said it expects revenue of $4.5 million to $6.5 million during the quarter. The Company also anticipates that it will secure a minimum of approximately $7.0 million of new orders in the first quarter of 2006.

Modine Manufacturing Co (MOD) presented today along with ChevronTexaco Technology Ventures, a ChevronTexaco subsidiary, a paper based on proprietary research and development regarding a new approach to increase the efficiency, and reduce the cost and complexity of hydrogen generation for distributed energy stations. The Modine and ChevronTexaco team is presenting the paper on advanced steam methane reforming (SMR) at the National Hydrogen Association conference. ChevronTexaco is working to develop and commercialize fuel-processing technologies that leverage existing energy infrastructures and convert a variety of feedstocks such as natural gas, into hydrogen. This is a critical step to enable the...

Energy Conversion Devices Inc (ENER) announced that they are going to be focusing on accelerating the commercialization of its products. The Board of Directors has unanimously approved Management's business restructuring plan to take full advantage of the favorable battery settlement agreement announced on July 7, 2004 and the increasing market interest in solar energy systems and hybrid electric vehicles.

by Lee Shane When one thinks of fuel cells and fuel cell technology some names immediately come to mind.  Ballard Power (BLDP) went public in 1993 and was listed on NASDAQ in 1995. A company that made its debut in 1997 was Plug Power (PLUG), a joint venture between DTE Energy and Mechanical Technology Inc.  Hydrogenics (HYGS) is a company that has been around for 60 years, but more recently has gotten investor attention for their fuel cell technology. Most of the technology produced by well-known fuel cell companies share common features… They are based on...

Modine Manufacturing Co (MODI) announced today that it has been awarded a contract with Vehicle Projects, LLC of Denver to supply thermal management hardware for a U.S. Department of Energy vehicle development and demonstration project. The nearly $8.6 million project will develop, manufacture, and demonstrate a mine loader powered by a fuel cell, along with associated metal-hydride storage and refueling hardware. The group will develop a 23 metric-ton, 160 kW fuel cell-battery hybrid mine loader. In the course of this three-and-a-half year project, Vehicle Projects and its subcontractors, including Modine, will manufacture this fuel cell/battery hybrid mine loader...

Renewable energy like wind and solar power and hydrogen fuel cells could blossom into a $100 billion a year global market in less than a decade as technology costs fall, according to a study. The combined market for "green" sources of energy has already grown 68 percent since 2002 to more than $16 billion last year, according to Clean Edge, a research and publishing firm based in California. You can view and download the complete Clean-Energy Trends report at the following link.

Medis Technologies Ltd. (MDTL) announced that during the first week of functional demonstrations, the fuel cell Power Pack products it made available to General Dynamics C4 Systems, a business unit of General Dynamics (GD), to provide power to General Dynamics' rugged PDA have achieved new levels of performance, to its knowledge never achieved before in micro fuel cells. The Power Packs have provided five watts and five volts, operating for a period of many hours with each refueling, operating in every orientation, all without generating any discernable heat. The fuel cell cartridge system has operated effectively to refuel...

Hydrogenics Corp (HYGS) announced it has received orders for three FCATS® fuel cell test stations from GS Caltex, a leading Korean energy company. Hydrogenics will provide a FCATS G300 Test Station and two FCATS G50 Test Stations with delivery expected in 2006. The test stations will be used to advance GS Caltex's activities in new and emerging energy technologies, including small stationary fuel cell applications (below 10 kilowatt) for residential use.

The Bush administration's budget for fiscal 2006 would provide more dollars to advance the production of domestic energy from coal, hydrogen and nuclear sources. The president's Hydrogen Fuel Initiative would receive an additional $35 million in funding in fiscal 2006, bringing total funding to $260 million. In 2003, Bush proposed $1.2 billion over five years to further the development of technologies to produce hydrogen and store hydrogen energy. The budget would also provide $3.6 billion in tax incentives through 2010 to spur renewable energy, as well as hybrid and fuel-cell vehicle purchases.

BTU International, Inc. (BTUI) announced the receipt of an order, valued at approximately $2 million, for an integrated manufacturing line for solid oxide fuel cell (SOFC) manufacturing. The order is from one of the largest European-based, global leaders in fuel cell technology. This order for a turnkey production line for manufacturing solid oxide fuel cells features multiple Convection Heat Treat drying systems and BTU's unique Elevator Hearth System for high temperature sintering. The order also includes multiple screen-printing systems, a laser marking and bar code reading system as well as the automated handling equipment to fully automate the...

Plug Power Inc (PLUG) announced the sale of twelve GenCore® backup fuel cell systems to the Florida Department of Environmental Protection (DEP). The 5kW hydrogen-fueled GenCore fuel cell systems will be integrated with uninterruptible power supply (UPS) equipment to provide critical backup power to DEP offices throughout the state of Florida. Plug Power was chosen for its ability to deliver a total fuel cell system solution that includes training, service, hydrogen delivery, and a system durable enough to endure extreme weather conditions.

PolyFuel plans to announce that it has achieved a breakthrough in fuel-cell membranes by using an alternative material: a hydrocarbon that it says costs only about half as much per square meter as the conventional material. Compared with the fluorine compounds that are the most commonly used for membranes in fuel cells now under testing, PolyFuel says that hydrocarbon membranes allow production of more electricity per square centimeter of membrane. That could mean that a fuel cell could produce the same power as a fluorine-membrane version, but would be smaller and lighter, according to the company. ...

Hydrogenics Corp (HYGS) and the Toronto Waterfront Revitalization Corporation (TWRC) are announcing the signing of a memorandum of understanding today at the Hydrogen and Fuel Cells 2004 Conference in Toronto. Together the two organizations will explore ways in which hydrogen fuel cell technologies and hydrogen production can support and build on the sustainable development goals of the TWRC. "Toronto is uniquely positioned to leverage Canada's strong leadership position in fuel cell technology and commercialization," said Pierre Rivard, President and CEO of Hydrogenics Corporation. "By engaging the local expertise we can enhance and accelerate the development of a...

Quantum Fuel Systems Technologies Worldwide Inc (QTWW) announced that its subsidiary, Tecstar Automotive Group, was awarded a contract for expanded parts distribution that will potentially generate up to $60 million in revenues over the next twelve months.

Distributed Energy Systems Corp (DESC) announced today that its wholly owned subsidiaries, Northern Power Systems and Proton Energy Systems, will build an advanced hydrogen fueling station through a partnership with EVermont, a non-profit organization that supports cleaner and more energy-sustainable vehicles. The grid-connected system will utilize locally generated renewable energy. This was made possible by a nearly $1 million Department of Energy (DOE) grant secured by Congressman Bernie Sanders (I-VT). The grant will be administered by the DOE's Hydrogen, Fuel Cell, and Infrastructure Technologies Program.

Air Products and Chemicals Inc (APD) hydrogen fueling technology was an integral part of an historic event today as Shell Hydrogen officially opened North America's first-ever hydrogen filling station at an existing retail gasoline site in Washington, D.C. The Benning Road demonstration project makes Shell the first energy company in North America to provide the environmentally friendly fuel at a consumer retail site, alongside conventional fuels. Initially, it will provide fuel for six GM Hydrogen 3 fuel cell vehicles participating in this Shell-General Motors partnership demonstration project.